MSW150 *resonant switchers, power factor correction and main converter *power factor correction up to 0.99, meeting iec61000 -3-2(en61000-3-2) *85 to 264vac universal input *high efficiency up to 90% *low emi, meeting fcc b, cispr b *less then 0.3ma leakage *thin type below 1u ul2601-1 recognized csa22.2 no.601.1 certified (cul) en60601-1 (nemko certified) ce mark (lvd only) *madical equipment * safety systems *dental systems *control equipment *microprocessor systems *monitoring equipment *peak loads (for motor drive, lamp) *6 MSW150 specifications item MSW150-12 MSW150-15 MSW150-24 MSW150-36 1 rated output dc voltage 12 v 15v 24 v 36v 2 rated output dc current (peak *6) 12.5 a ( 25a) 10.0a(20.0a) 6.3 a (12.5a) 4.2 a (8.3a) 3 maximum output power (peak *6) 150.0w(300.0w) 150.0w(300.0w) 151.2w(300.0w) 151.2w(298.8w) 4 adjustable voltage range *1 11.7 ~ 12.6v 14.7 ~ 15.8v 23.5 ~ 25.2v 35.3 ~ 37.7v 5 efficiency (120/230vac, typ) *1 85% / 86% 86% / 87% 87% / 88% 88% / 89% 6 maximum ripple noise 80mvpp 100mvpp 150mvpp 200mvpp 7 over current protection *3 25.5a ~ 20.5a ~ 13a ~ 8.5a ~ 8 over voltage protection *4 13.8v ~ 17.3v ~ 27.6v ~ 40v ~ 9 input voltage range 85v ~ 264v 10 input frequency range 47hz ~ 63hz 11 input current *1 1.7a (100vac), 0.8a(230vac) 12 power factor *1 0.99typ (100vac), 0.95typ (230vac) 13 inrush current *2 20apk max (120vac), 40apk max (240vac) 14 hold-up time *5 20msmin notes *1 when maximum output is worked *2 when cold start works with rated voltage at 25oc ambient temperature *3 recovers automatically *4 recovers on input again *5 when maximum output is worked, after last ac line peak *6 (peak) : peak loads for 10 seconds or less are ac ceptable. input voltage range ac120v~ac264v only. specifications subject to change without notice.(2004.9)
MSW150 MSW150 general specifications item 1 maximum line / load regulation 0.5% 2 voltage tolerance ratio 3% at line, load, time, temperature 3 operating temperature -10 ~ 55oc (refer to output derating) 4 operating humidity 30 ~ 90%rh (non condensing) 5 storage temperature -30 ~ 85oc 6 storage humidity 10 ~ 95%rh (non condensing) 7 cooling convection or forced air cooling (refer to output derating) 8 electric strength voltages input ? output 4000vac 1 minute, input ? fg 1500vac 1 minute, output ?fg 500vac 1 minute 9 insulation resistance 100m ? min dc500v 25oc 70%rh input ? output, input ? fg, output ? fg 10 leakage current 0.3ma max (240vac,50hz) 11 vibration 10 ~ 55hz 2g (3 directions each 1 hour) 12 shock 20ms 20g (3 directions each 3times) 13 safety standards ul2601-1, csa601.1 (cul), en60601-1 (nemko) approvals 14 conduction noise meeting fcc class b, en55022 class b, vcci class b 15 harmonic distortion meeting en61000-3-2 16 mains surge meeting en61000-4-5 level 3/4kv(cm), 2kv(dm) 17 dimensions 105(w) 190(d) 32(h) mm/4.13 ?(w) 7.48?(d) 1.26?(h) 18 weight 590g /1.30lb. typ MSW150 outline drawing connectors used part description part na me manufacturer q.t.y cn1 pin header (input side) b2p3-vh or t7094 jst emuden 1 cn2 pin header (output side) b4p-vh or t7094 jst emuden 1 matching housings and pins (n ot included with the product) part description part na me manufacturer q.t.y cn1 socket housing vhr-3n jst 1 cn2 socket housing (cn1, cn2) terminal pins vhr-4n bvh-21t-p1.1 jst jst 1 6 MSW150 output derating
< 18 4= cy) 4< ?4 a0c da 4 ? $ dc?dcy%>f 4a?
mounting direction (conv) specifications subject to change without notice.(2004.9)
}
?
?
# ! 8=?dc #
>dc?dc # " " " ?
?
? ?,8c7 y2>e4a>?c8>= # #
#
# # #
a:conv.with cover(option) b:conv.open frame c:recommended minimum air vrocity 0.7m3/minute
|
